美标锁芯

美标插芯锁体系列

高级商用美标插芯锁五金系统ANSI COMMERCIAL MORTISE LOCK HARDWARE

美标锁芯 CYLINDER

可替换锁芯为高安保锁芯，适用于高安保公共场所

可选尺寸： 1-1/8"， 1-3/8".1-1/2”,1-5/8"，1-3/4"， 1-7/8",2"

表面处理： SS、 PVD、AB

可做总钥匙管理系统，最高6级 管理

Removable core cylinders are designed to give the user the

flxibility to replace the cylinder nechanism by using a controlkey. This will minimize expensive labor and hardware costs for high turnover situations.

L=1-3/8", 1-1/8",1-1/2", 1-5/8", 1-3/4", 1-7/8", 2"

Finish: SS, PVD, AB

optional: master key

美标插芯锁要求和检验方法

ANSI/BHMA A156,13MORTISE LOCK

适用范围APPLICATION SCOPE

本标准规定了美式插芯锁性能要求，包括寿命测试，功能测试、安全测试、材料评估测试、表面处理测试及尺寸标准依据该标准，插芯锁具的性能等级和安全等级分别分为3级。各级别性能要求如下：

This Standard establishes performance requirements for mortise locks and latches, which includes cycle tests, strength tests, operational tests, security tests, material evaluation tests. finish tests and dimensional criteria. Two Classifications of Grades are described in this standard, Operational grade

and Security Grade, The minimum acceptable Grade lever of both is grade 3.The tests and requirements of all grades are as follows

1.转动旋钮拧开锁舌需要的力：

所有级别最大:9lbf-in(1Nm)

Torque to retract dead bolt or torque to retract dead bolt and latch bolt by turn

Requirements Maximum all grades: 9 lbf-in(1 Nm)

2.转动钥匙拧开锁舌需要的力

所有级别最大:9lbf-in(1Nm)

Torque to retract dead bolt or torque to retract dead bolt and latch bolt by key

Requirement maximum. All Grades: 9 lbf-in(1Nm

3.转动球形把手或者水平把手拧开锁舌

需要的力：

所有级别最大：

球形把手:9|bf-in(1Nm)

水平把手:28|bf-in(1Nm

入户带按钮的大门锁

所有级别:9lbf-in(1Nm)

Force or torque to retract latch by knob or lever.

Requirements maximum:

Knob-all grades: 9 lbf-in(1Nm)

Lever-all grades: 28 lbf-in( 1Nm)

Entry handleset thumb piece:

Requirements Maximum All grades: 9 lbf-in( 1Nm)

4.闭门力

所有级别最大4.5lbf(20N

Force to latch door

Requirement Maximum: All grades 4.5 lbf (20N)

5.门锁闭时斜舌伸出长度

最小：一级:9/6in。(14.3mm)

二级和三级:8/3in。(9.5mm)。

Minimum projection of auxiliary dead latch to deadlock latch bolt

Requirements minimum Grade 1: 9/6 in (14.3mm), Grade 2 and 3: 8/3 in. (9.5mm)

6.副方舌伸出的长度：

最小：一级3/8in(9.5mm

二级和三级:5/16in(79mm)

Minimum projection of auxiliary dead latch to deadlock latch bolt:

Requirements minimum Grade 1: 3/8 in. (9.5mm), Grade 2 and 3: 5/16 in (7. 9mm)

7门弯曲试验：

所有级别最大：

球形把手:45|bf-in(5Nm)

水平执手:70bfin(8Nm)

按钮40bf(180N)

平板拉手:65|bf(290N)

Warped door test

Requirements for Maximum all grades

Knob: 45 Ibf-in( 5Nm)

Levers: 70 lbf-in( 8Nm)

Thumb pieces: 40lbf(180N

Paddles: 65Ibf(290N)

8.锁舌强度：

斜舌强度最小：所有级别:1200|bf(5300N)

方舌强度最小：所有级别:1350bf(6,000N)

Bolt strenght test:

Requirements:

Latch Bolt minimum: All grades: 1200 Ibf(5, 300N)

Dead Bolt minimum: All grades: 1350 Ibf(6, 000N)

9.轴负重测试

所有级别最小：

球形把手，水平执手位于轴心时:500|bf(2,200N)

水平执手距轴心2in(51mm)时:360lbf(1600N)

按钮:150lbf(2200N)

距轴心2in(51mm)时:225|bf(1000N

Axial Load Test

Requirements All Grades minimum:

Knobs, levers at the spindle or grips: 500 lbf(2, 200N)

Levers 2 in(51mm)from spindle: 360 lbf( 1600N)

Thumb pieces: 150 lbf(2200N)

Paddles: at the axle: 2 in(51 mm) from the axle: 225 lbf(1000N)

10.垂直负重测试

一级:360|bf(1600N)

二级:250|bf(1100N

三级:150lbf(670N)

Vertical Load Test

Grade 1: 360 lbf(1600N)

Grade2:250|bf(1100N)

Grade 3:150 lbf(670N)

11.门锁闭时外水平执手扭力测试：

所有级别最小:450lbf-in(50Nm)

Locked Outside Lever Torque Test:

Requirements: All Grades minimum: 450 lbf-in( 50Nm)

12.门未锁闭时水平执手扭力测试：

所有级别最小:450lbf-in(50Nm)

Unlocked Lever Torque Test

Requirements: Lever Torque minimum: All Grades: 450 lbf-in( 50Nm)

13.门未锁闭时入户门锁负重测试：

所有级别最小:70|bf-in(310Nm)

Unlocked Entry Handle set load Test:

Requirements: Unlocked Entry Handle set minimum: All

Grades: 70 lbf-in(310Nm)

SECUR| TY TEST安全测试

1.球形把手，水平执手或平板拉手冲击力测试：

一级:75lbf-ft(100J)10次冲击

二级:75|bf-ft。(100J)5次冲击

三级:75|bf-ft.(100J)2次冲击

Knob, Lever or Paddle Impact Test:

Requirements:

Grade 1: 75lbf-ft (100J)10 blows

Grade 2: 75lbf-ft (100J )5 blows

Grade 3: 75lbf-ft (100J)2 blows

2.锁芯护片及锁眼扣冲击力测试：

一级:75lbf-ft(100J)10次冲击

二级:75lbf-ft(100J)5次冲击

三级:75lbf-ft。(100J)2次冲击

Cylinder guard or Escutcheon Impact Test:

Requirements:

Grade 1: 75Ibf-ft (100J)10 blows

Grade 2: 75lbf-ft (100J )5 blows

Grade 3: 75lbf-ft (100J)2 blows

3.锁芯护片及锁眼扣拉手测试：

一级:3600lbf-ft.(16,000N)

二级:2500lbf-ft.(11.000N

三级:1000|bf-ft(4,400N)

Cylinder guard or Escutcheon Tension Test:

Requirements:

Grade1:3600lbf-ft.(16,000N

Grade2:2500lbf-ft.(11,000N

Grade3:1000lbf-ft.(4,400N)

4.锁芯体及锁芯壳的拉手测试：

一级:3600|bf-ft.(16,000N)

二级:2500|bf-ft.(11.000N)

三级:1000lbf-ft.(4,400N)

Cylinder body or housing tension Test

Requirements:

Grade1:3600|bf-ft.(16,000N

Grade2:2500lbf-ft.(11,000N)

Grade3:1000lbf-ft.(4,400N)

5.锁闭的球形把手，水平执手，平板拉手测试，球形把手扭力

一级:175|bf-ft.(240Nm)

二级:120lbf-ft.(160Nm)

三级:55lbf-ft.(75Nm

Locked Knob. Lever or Paddle Test

Requirements:

Knobs Torque

Grade 1: 120 lbf-ft (160Nm)

Grade 2: 80 lbf-ft (110Nm)

Grade 3: 35 lbf-ft (47Nm)

水平执手扭力

一级:120lbf-ft.(160Nm)

二级:80lbf;ft.(110Nm)

三级:35|bft.(47Nm)

Lever Torque

Grade 1: 120 lbf-ft (160Nm)

Grade 2: 80 Ibf-ft (110Nm)

Grade 3: 35 lbf-ft (47Nm)

平板拉手扭力

一级:675lbf(3000N)

二级:450|bf(2000N)

三级:225lbf.(1000N)

Paddle force

Grade1:675|bf.(3000N)

Grade 2: 450 lbf(2000N

Grade3:225|bf.(1000N)

6.锁芯体和锁芯壳扭力：

一级:120|bf-ft,(160Nm)

二级:80lbf-ft.(110Nm)

三级:35lbf-t(47Nm)

Cylinder body or Housing Torque Test:

Requirements

Grade 1: 120 lbf-ft (160Nm)

Grade 2: 80 lbf-ft (110Nm)

Grade 3: 35 lbf-ft (47Nm)

7.锁芯护片和锁眼扣扭力：

一级:120|bf-ft.(160Nm)

二级:80bf-ft.(110Nm)

三级:35|bf-t.(47Nm)

Cylinder Guard or Escutcheon Torque Test:

Requirements

Grade 1: 120 Ibf-ft, (160Nm)

Grade 2: 80 Ibf-ft (110Nm)

Grade 3: 35 Ibf-ft (47Nm)

8.锁芯头冲击力测试

一级:75|bf-ft。(100J)10次冲击

二级:75|bf-ft.100J)5次冲击

三级:75lbf-ft。(100J)2次冲击

Cylinder Face Impact Test:

Requirements

Grade 1: 75 lbf-ft (100J)10 blows

Grade 2: 75 lbf-ft (100J)5 blows

Grade 3: 75 lbf-ft (100J)2 blows

9.方舌或斜舌，或方舌和斜舌舌冲击测试：

一级：在二缎的基础上增加两次150lbf-ft(200J)冲击

二级：在一的基础上增加两次120lbf-ft160J)冲击

三级:2次120lbf-t(160J)冲击加上两次9olb-ft(160J)冲击

Dead Bolt or Latch Bolt or Dead Bolt and latch Bolt Impact Test Requirements:

Grade 1: Grade 2 requirements plus 2 blows of 150 lbf-ft (200J)

Grade 2: Grade 1 requirements plus 2 blows of 120 Ibf-ft (160J

Grade 3: 2blows of 60 lbf-ft(80J)plus 2 blows of 90 lbf-ft (120J

10.锁舌压力测试

所有级别最小：

斜舌:360|bf(1600N

方舌:600lbf(2700N

Bolt Pressure Test

Requirements: All Grades Minimum:

Latch Bolt: 360 Ibf(1600N)

Dead Bolt: 600 Ibf(2700N)

11.方舌锯切试验

所有级别:5分钟

Dead Bolt Sawing Test:

Requirements: All Grades Five Minutes.

CYCLE TEST寿命测试

一级:1,000,000次

二级和三级:800,000次

Cycle requirements

Grade1:1,000.000

Grade 2 and 3: 800.000

FINISH TEST表面处理

1.盐雾测试

中性盐雾测试：

除锁体面板和锁片外所有有机涂层:96小时

锁体面板和锁片的有机涂层:24小时

无机涂层:200小时

Salt Spray Test

Neutral salt spray Test

Organic coatings on all parts except fronts and strikes 96 hours

Organic coatings on lock fronts and strikes: 24hours

Inorganic coatings: 200 hours

CASS盐雾测试：

所有级别无机涂层:96小时

CASS Salt Spray Test

Requirements: All Grades: Inorganic coatings on all parts: 96 hours

2.湿热度测试

除锁体面板和锁片外所有有机涂层:240小时

锁体面板和锁片有机涂层；48小时

Humidity Test:

Requirements all Grades

Organic coatings on all parts except fronts and strikes: 240 hours

Organic coatings on lock fronts and strikes: 48 hours

3.铅笔硬度测试：

所有级别：带有有机涂层的所有材料:4小时

Pencil Hardness Test

Requirements all grades: For all material with organic coatings: 4hours

4.平板摩擦测试:500次

Taber Test: Requirements: 500 cycles

5.汗液测试：

所有级别：带有有机涂层的所有材料:4次。

Perspiration Test

Requirements All Grades: For all material with organic coatings: 4 cycles

6.紫外光及冷凝测试：

所有级别：所有涂层144小时

Ultra Violet Light and Condensation Test

Requirements: All Grades: all Coatings: 144 hours

MATERIAL EVALUATION TESTS

材料评估测试

球形把手变形测试：

一级：变形量不得超过10%

二级和三级：变形量不得超过25%

盖板和锁眼扣凹坑测试

一级:0.075in(1.9mm)

二级和三级:0.100in。(2.5mm

Knob crush Tests:

Grade 1: Deformation shall not exceed 10%

Grade 2 and 3: 25%

Rose and Escutcheon Dent Test

Requirements:

Grade 1: 0.075 in(1.9mm)

Grade 2 and 3: 0. 100in (2. 5mm